The Best Scroll Saws For Your Workshop
Scroll saws make up an essential part of a woodworker’s life, anywhere from a professional to a hobbyist. Scroll saws will vary with the features packed in based on the job at hand. Based on a few factors, you should be able to narrow down to the range of saws that are appropriate to you:
- More detail in the woodwork will require a mid-range to high-end model to assure closer and more precise cuts
- Blade type and rotating speed will dictate the type of model to choose, for instance, to work on softer wood, you will require a faster, but very narrow blade
Read on for a review of our preferred models, gauging which one will fit your needs best.
The Best Scroll Saws on the Market Today
- Double parallel-link arm design dramatically reduces vibration and noise, for extremely accurate cuts
- Exclusive tool-free blade clamps allow blade changes in seconds
- On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm for added convenience
- Arm design pivots from the back of the saw to the front, shortening the arm movement for smoother, quieter operation
This scroll saw is perfect for when it comes to handy wood works that can be done either at home or any work site.
For starters, it is designed to meet the user’s comfort needs because of the way the arm of the saw is positioned. It is comfortable to hold, and users can go for a long period on it without getting tired or frustrated. It is not expensive either.
The weight of this beauty is 65.6 pounds and being that it would be staying on a table top while being used, it is fairly light. It is an electric saw meaning it does not require batteries and its dimensions are 29.5 x 19.5 x 12.1 inches. Just the perfect compact size for frequent users.
Easier Arm Movement
The arm on this tool is built specifically so that there is a greater decline of noise while in use and is very cozy to hold. There is that annoying vibrating feeling that you would usually get on other tools while working and this saw avoids that. It also has free movement which means that it can tilt back and forth making work much smoother. When you can move it freely it means that you can get more precise with your work.
Vibration
This saw has minimum vibration because of the double parallel-link arm. Not only does it have low vibration but consequently it also has lower noise levels. Everyone wants to be comfortable while they work with a tool which is why this one is just perfect. The low noise level and vibration reduces irritation and makes working on your project worthwhile. We all know that noise is just distracting so in order to get the best results it’s best to do it under conditions where you can easily focus.
Little Maintenance
You need little to almost no maintenance on this tool .and with that you can save both money and time. How? Well it will save you the time you would use to go all the way to the repair shop or appliance shop. Money? You would not need to use fuel in your car to actually get to that repair shop so you are welcome.
Pros:
- Comfortable
- Smooth to use
- Not much maintenance needed
- Nice design
- Quiet
Cons:
- Expensive
- Motor is fragile
- Requires you to read manual carefully
- Dust port adapter keeps line-of-sight clear and work space clean
- Auto tensioning quick-change mechanism for easy accessory change and optimal blade tensioning
- Detachable coping function for handheld use to take the tool to the work piece
- Variable-speed control for optimal cutting in a variety of materials
At less than 8 dollars we have the DREMEL MS20-01 saw. Now just by the way it looks first of all without even checking out the specs, we can already see that it is unique.
So apart from it being beautiful, it has some pretty amazing descriptions to go with it. It has a powerful clamp that will attach to any table top to enable you to work wherever you please. Not only that but it also ha adjustable speed control just like any other commendable work tool. The speed control will allow you to use different speeds depending on the material you are working on.
No batteries required. That’s right. I just saved you multiple trips to the convenience store. It is purely electric and has an electric cord for that. (Could I be any more obvious?) This baby requires 120 volts and measures at 18.5 x 14.5 x 4.8 inches.
Great Design
It is not hard to see that the design of this tool is very appealing. It is small, compact, has a great color scheme and is just generally nice to look at. It being compact it means that it can easily be moved around or stored in places easily. That’s the other advantage. It has easy storage. And anyway, who would not like a snazzy looking tool right? Sure looks aren’t everything but they are something.
Manageable Weight
At 4.7 pounds how could you say no to it I mean is not just the most convenient weight? Either way, it is not like you will have to carry it around while using it because it will be in a stationary position the whole time. You can even get the kids to help you carry this one when you do not want to do it yourself. 4.7 pounds is a very manageable weight and you wouldn’t want to pass up the opportunity to get it.
Adjustable Speeds
The adjustable speeds put you as the user or owner in control. It will allows you to utilize the tool without changing equipment. Now as well as this, it will also limit the damage of the materials being cut by controlling how severe or the amount of force that is being used on them. This means that you can be sure of how well the material you are cutting would turn out.
Pros:
- Strong
- Nice design
- Lightweight
- Adjustable speeds
Cons:
- Blades are not very strong
- Cannot take large pieces of wood
- Only handles small scale jobs
- Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
- Variable speed goes from 400 to 1600 strokes per minute ; Motor : 120Volts, 60 Hz, 1.2Amps
- Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
Now this one is a bit bigger and just by the looks of it is meant for the heavier jobs. Although it is not too heavy, at 26.9 pounds, it is powerful.
It wouldn’t make sense if a tool like this used batteries. Which is why it doesn’t. See where I’m going with this? If not, I’m saying it is electric. It only requires a power source for it to function. Apart from it being electric, it also has variable speeds allowing you to be in control.
One of my favorite specs about this saw is that is can cut through up to 1.9 inches thick pieces of wood. The clamp on it allows you to do more accurate and delicate pieces of work because it reduces movement and vibrations. The dust port is also there to make sure that you have tidy work.
Accuracy
Since the clamp is a very strong one, you will get the most out of your work if while at it, there is minimal to no movements. It allows you to male very accurate cuts and eliminates back and forth movement. The movements back and forth are the ones which would cause you to have rough cuts and ones that are not aligned. Accuracy is one of is not the most important things here.
Speed
The adjustable speed can go from 400 to 1600 strokes per minute, so depending on what you are working on, you can set just the perfect speed. It is also important to acknowledge that it can cut through tough pieces of wood. This variable speed feature will also reduce the speed at start up. You would not want it to just start up on full on speed both for safety and accuracy.
Electric
First of all it is cost efficient. Meaning that going to the store to buy batteries is now something that you can say no to. Apart from saving you that money, it will also save you energy to go all the way to make the purchase. It has a long enough cord that carries just the right amount of current to work with an appliance like this one.
Pros:
- Cuts through tough pieces
- Electric
- Variable speed control
- Affordable
Cons:
- Blades need work
- Needs a lot of maintenance
- Blades can’t handle some pieces
- 1/8HP, 1-Amplifier, 110-Volt, 60Hz motor
- 16-Inch maximum cutting width
- Includes a gooseneck work light, dust blower and dust port
- Plain or pin blades
For all of us who like to do precise and accurate work say hello to the Fox W1713. As a start, for safety reasons it has a protective, strong plastic barrier that prevents pieces of wood flying into your eyes while at work.
Secondly, this saw has gotten very positive reviews because of how powerful it is. Don’t believe me? It can cut through 2-inch thick pieces of wood so be sure that it will do a tremendous job. It has a great design aside from the great technical details. It weighs in at 35.3 pounds, and the dimensions are 12.8 by 26.4 by 15.9 inches.
This tool is an electric one and has two-way dust control. The dust control is going to be perfect for when you need to get clean and tidy work done and can cut to up to 45-degree angles.
Cutting Capability
Since it can cut through 2 inches thick pieces of wood and up to 45-degree angles, there is nothing more to say than the fact that it has an amazing cutting capability and will improve accuracy. Two inches thick of a piece of material is no joke. And cutting at a 45 – degree angle will give you the liberty of adjusting whatever it is that you are cutting because it is not all the time that you would be making straight cuts.
Safety
This too will keep you on the safe side because of the dust barrier on it. When working with something like a saw, splinters are a common hazard and we want as much as possible to avoid them. Aside from that, you will be able to clearly see what it is that you’re working on and avoid petty mistakes. The barrier is there not only to avoid stuff getting dust into your eyes but also for you to have better visibility.
Blade Changes
Whenever you may need to change blades depending on the type of material you would be dealing with, this saw makes life much easier for you. I does not take much of a hustle to change the blades because it very easy to use. The instructions are clearly set in the manual. Changing blades is very important because at times the blade might break or the blade may get blunt.
Pros:
- Easy to change blades
- Makes smooth cuts
- Can handle tough wood
- Minimal vibrations
- Powerful
Cons:
- Heavy
- Needs a lot of maintenance
- You need to read manual carefully
- Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
- Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
- Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
- Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
Delta once again has proved that it can make some of the best tools out here. Allow me to introduce the Delta 40-694 20. This tool will give you a run for your money.
The adjustable speed can vary from 400 to 1750 strokes per minute allowing you to do accurate pieces of work. Along with this is the powerful clamp that will give you maximum stability while cutting. Since a saw can be a dangers piece of equipment to work with, it is important that safety measures are taken seriously.
30 by 20 by 13 inches are the dimensions of this saw, and it weighs only 60 pounds. It is corded meaning that you do not have to spend any time or money on batteries since it is electric. So go ahead! Why don’t you try this one?
Noise Reduction
Because of how the arm is designed it has definite noise and vibration reduction. If there is less noise, there will be more concentration and thus getting better-finished results. Noise is one of the biggest irritations that someone can face while working on something as delicate as cuttig out certain things. Reduced noise means less vibration meaning less physical irritation on your hands as well.
Small Storage
There is a small storage compartment on the side of the main tool. It will allow you to store two blades and they will be very secure. You would constantly want to know where your spare blades are in case you needed them which for most cases you eventually would. So that is what the storage section is there for. Instead of you soring the blades further away or somewhere you might forget, it is best to have them at your sight.
Cheaper
Different people are at different economic situations right? This one caters for all. It is something that is very affordable and just about anyone can buy it. Plus it being at a lower price tag it attracts more users and believe me it will give you value for your money. Just because it is more pocket friendly, does not mean that it does not perform as it should, because it does.
Pros:
- Cheaper
- Sturdy
- Low noise levels
- Nice worktop table
Cons:
- Heavy
- Expensive
- Can stall at times
- Large aluminum 20" x 12 5/8" dual tilting table allows for bevel cutting up to 45 degrees
- Patented table top bevel scale for accurate and convenient readings
- Tool-less blade holder makes quick and easy 5" pin or plain end blade changes
- Built-in adjustable LED work lamp for better illumination of work area
Another brilliant tool to use is this one. Not only is it just the saw itself but it also comes with a stand. The stand is there to enable you to get the most stability and accuracy.
Adding onto the accuracy part, there is also an inbuilt LED light which will enable you to get the best visibility no matter the time or setting. It as well has adjustable speeds from 500 strokes per minute to 1500 strokes per minute.
It weighs a mere 45.9 pounds, and the dimensions are 34 by 24 by 45 inches meaning it’s neither too big nor too heavy. This tool is brilliant to either have at home or at your workplace.
LED Light
The inbuilt LED light is one of the best features of this saw. For better sight and better work you need to have a clear vision of what it is that you are doing meaning the light being there is a big plus. We know that we are working with a sharp tool so if you want to keep all your fingers, might as well get this tool since it has a source of light where you can see clearly what it is that you’re working on.
Worktable
The worktable on this tool is big enough for you to work comfortably on it. At the beginning of every project, you usually start with a big chunky piece of wood at this worktable is just enough to take care of things like those. It will also enable you to get accurate pieces of work done and avoid unnecessary injuries while cutting away. When you have a big workspace, you can see clearly what you want to do and where.
Stand
The stand at this point has become one of the very key features that any good appliance should have. If we look at all these three features, they all contribute to the accuracy and easier working conditions. The stand also adds on to this. With it you can work upright and accurately and will prevent you from getting too tired. While working on cuts, it’s best to be up rather than seated down for better precision.
Pros:
- Large work table
- Affordable
- Strong
- Has stand
- LED work light
Cons:
- Stand is too low
- You have to be very careful with the blades
Prices and availability are accurate as of 2024-09-14 at 09:54 CST - Details